APPLICATION

LDK's farm implement bearing is widely used in agricultural machinery equipment. It can continue to withstand continuous vibration and high shock loads, meet the requirements of long life, long-lasting durability under heavy load conditions, thus help to reduce machine downtime and maintenance costs.Phone:   +86-592-580 8851 / +86-592-580 7618Email:     sales@ldk-bearing.com ; benjamin@ldk-bearings.com

Mounted ball bearings are widely used in automatic transmission lines in factories, luggage conveyor belts in airports and other scenes.They are easy to install and disassemble. LDK bearings offers a full line of mounted bearing units tailored for the material handling industry. Available locking options include set screw, eccentric locking collar, adapter sleeve and concentric locking collar (Accu-Grip). Open and close end caps are available on material handling units to provide protection against injuries due to contact with rotating parts. It will help to reduce the downtime and the maintenance rate.Phone:    +86-592-580 8851 / +86-592-580 7618Email:      sales@ldk-bearing.com ; benjamin@ldk-bearings.com

LDK Accu-Grip® bearing units are designed to produce 360 degrees of equalized locking contact. The shaft is centered concentrically in the bore of the bearing and always runs true. Shaft offset is eliminated and premature locking failure is minimized. Since locking design is a major factor in mounted bearing performance, Accu-Grip®stands out as a major advantage.* Quick assembly with minimum effort. Only one cap screw to tighten down, in one position!* Simplify equipment maintenance and lower replacement/maintenance time and cost.* Quiet running. Vibration and noise significantly reduced.* Increase manufacturing productivity. Reduce inventory and ordering complexity.Phone:    +86-592-580 8851 / +86-592-580 7618Email:       sales@ldk-bearing.com ; benjamin@ldk-bearings.com

LDK Wash-down series were developed specially for the harsh conditions of the food and beverage industry. With available products ranging from deep groove ball bearings, bearing inserts and mounted units in numerous combinations of housings, protective covers, grease and sealing options. LDK provides tailored solution to improve your overall equipment effectiveness, while increasing productivity and profits.Phone:   +86-592-580 8851 / +86-592-580 7618Email:     sales@ldk-bearing.com ; benjamin@ldk-bearings.com

Mounted ball bearings are often seen on both sides of the brush spindle of the automatic snow sweeping machines. Low temperature moisture, constant vibration and high shock are real challenge for municipal workers.LDK offers offers full line of mounted ball bearing units tailored for the snow removal equipments.Phone:   +86-592-580 8851 / +86-592-580 7618Email:     sales@ldk-bearing.com ; benjamin@ldk-bearings.com

LDK Bearing Units consist of a sealed single-row ball bearing with spherical outside diameter and extended inner ring mounted in a pillow block or flanged housing. The spherical fit accommodates initial misalignment. The LDK Bearing Units also feature flingers and triple lip seal that keep contaminants away from the bearing and improve the sealing performance. Housings are available in ductile cast iron, cast steel or stainless steel with a variety of shaft locking mechanisms. Phone:   +86-592-580 8851 / +86-592-580 7618Email:     sales@ldk-bearing.com ; benjamin@ldk-bearings.com

Many petrol stations now have automatic car washing equipment, and bearings are one of the important components of automatic car washing equipment. The humid working environment of car washing equipment makes the selection of bearings more stringent.LDK offers a wide variety of products with different material combination in order to meet the challenge of high humidity, corrosion and long hour operation.Phone:   +86-592-580 8851 / +86-592-580 7618Email:     sales@ldk-bearing.com ; benjamin@ldk-bearings.com

Spherical plain bearing is a sliding bearing, which has the characteristics of large load capacity, impact resistance, wear resistance, and self-aligning etc. It is generally used for low-speed rotation and swing movement. Tilting movement within the angle range can still work normally when the supporting shaft and the housing are at a large non-concentric angle. Due to these characteristics, spherical plain bearings and rod end bearings are widely used in the solar power generation industry. Phone:   +86-592-580 8851 / +86-592-580 7618Email:     sales@ldk-bearing.com ; benjamin@ldk-bearings.com

LDK offers tailored product and solution for heavy truck makers home and abroad, contributing its effort to control vehicle exhaust emission.Phone:   +86-592-580 8851 / +86-592-580 7618Email:     sales@ldk-bearing.com ; benjamin@ldk-bearings.com

Spherical rod ends are one of the most commonly used joints in the aftermarket. From sway bar end links to long-travel A-arms, these non-rebuildable joints range drastically in strength and size. Phone:   +86-592-580 8851 / +86-592-580 7618Email:     sales@ldk-bearing.com ; benjamin@ldk-bearings.com

Heim joints and rod ends are very commonly used in off-road recreational vehicles. In addition to the steering system, they are also used in suspension links, traction bars, sway bars and throttle cables that require positioning and adjustment. The rod end equipped with self-lubricating material can lubricate the steel ball without oiling, ensuring the smooth rotation of the bearing and reducing noise. At the same time, higher strength alloy materials(Chromoly) and heat treatment can be used to enhance the mechanical performance of the bearing according to different working conditions.Phone:   +86-592-580 8851 / +86-592-580 7618Email:     sales@ldk-bearing.com ; benjamin@ldk-bearings.com

The spherical plain bearing has the characteristic of compact radial structure, flexible rotation,and high load capacity. It is widely used as an independent rear shock absorber for off-road, vehicles, racing cars, auto-sport and road sports motorcycles. Phone:   +86-592-580 8851 / +86-592-580 7618Email:     sales@ldk-bearing.com ; benjamin@ldk-bearings.com